Tirth Enterprise

• Dimension: 460x260x380mm
• Power: 180W
• Bundling Scope: 220*180mm
• Machine speed: 3s/time
• Tape width: 10-15mm
• Tighten Strength: 10-120N
• Net weight: 13.5 kg
• Smooth Running.
• Telephonic service free for life time (Monday to Saturday 9 AM to 6 PM, Sunday Weekly off) service will be discontinue if you use other company’s spare in this machine.
• Spare available any time against full payment.
• Made in India.
  
  

 

Additional Information:

• Production Capacity: 3s/time
• Delivery Time: 20 DAYS
• Packaging Details: Wooden Box Packing

• Dimension: 460x260x380mm
• Power: 180W
• Bundling Scope: 220*180mm
• Machine speed: 3s/time
• Tape width: 10-15mm
• Tighten Strength: 10-120N
• Net weight: 13.5 kg
• Smooth Running.
• Telephonic service free for life time (Monday to Saturday 9 AM to 6 PM, Sunday Weekly off) service will be discontinue if you use other company’s spare in this machine.
• Spare available any time against full payment.

Made in India.

Additional Information:

• Production Capacity: 3s/time
• Delivery Time: 20 days
• Packaging Details: Wooden Box Packing

• Production: up to 900 tying/ Hr.(Depends on operator)
• Electric control by PLC
• Req. Power for machine: 2.5 HP (Single phase)
• Required Air point
• Machine weight: @180 Kg.
• Machine Size: 24x20x41 inch ( LxBxH)
• Conveyor size: 15 x 84 x 18 inches
• Automatic bundling.
• Maximum bundle dia : 100 mm
• Free: Training of machine operation and general Maintenance at Surat factory.
• Free: 1 tool set.
• Warranty: 9 months in Main motor, PLC & Gearbox.
• All parts and aggregates are produced by us and the internal working method is copyright by sohamtex engineers. 
• Telephonic service free for life time (Monday to Saturday 9 AM to 6 PM, Sunday Weekly off) service will be discontinue if you use other company’s spare in this machine.
•  Spare available any time against full payment.
• Easy to operate & low maintenance.

Additional Information:

• Production Capacity: up to 900 tying/ Hr.(Depends on operator)
• Delivery Time: 30 days
• Packaging Details: Wooden box packing

·         Machine Speed: 2000- 2500 Nos. / HR.

·         Production per stroke of machine: 20 Nos.

·         Electric control panel with PLC.

·         Machine Operating: Automatic

·         Material Filling: Automatic (once manual in bucket)

·         Required Power: 2 HP, 3 Phase

·         1 mould set free with machine.

·         Mold plate size: 300 x 350 mm

·         Hydraulic operating system with 15-ton capacity

·         Hydraulic Oil: Required 25 liters (By Client’s scope).

·         Oil Tank: 35 Liters capacity

·         Required Air compressor: 2 hp 3 phase (your scope)

·         Machine size : 65x40x71 (LxBxH)

·         Machine Weight: @312 Kg.

·         Warranty: 9 Months warranty in main motor & PLC

• Free: Training of machine operation and general maintenance at our Surat factory.
• Free: 1 tool set
• Easy to operate & low maintenance.

• Telephonic service free for life time (Monday to Saturday 9 AM to 6 PM, Sunday Weekly off) service will be discontinue if you use other company’s spare in this machine.

• Spare available any time against full payment.
• Lifetime payable service available. 

·         Made in India.

Additional Information:

• Production Capacity: 20 nos
• Delivery Time: 40 days
• Packaging Details: Wooden box packing

·         Machine Speed: 90 Stroke/minute
·         Production: up to 200 kg /8Hr. (Depends on Materials Quality)
·         Soundless Gearbox with hardened gears & grounded Shafts.
·         Auto stop when material will finish, raw stick finish and stick not pass from die
·         Main Motor: 1.5 HP Single Phases.
·         Length of Stick: 8” to  9”
·         Machine weight: @125 Kg.
·         Machine size : 60x32x42 inch (LxBxH)
·         Telephonic service free for life time (Monday to Saturday 9 AM to 6 PM, Sunday Weekly off) service will be discontinue if you use other company’s spare in this machine.
·         Free: Material mixing formula, Training of machine operating and general maintenance at our Surat factory.
·         Free: 1 tool set, Bowl, Cleaning rod, Rocket rod, machine manual.
·         Warranty: 9 months in Main motor, Ac drive, Gear box, DC Card & Slider.
·         This machine designed by our Engineer.
·         This machine is produced by our technical staff.
·         (Not import from other country.)
·         Easy t operating & low maintenance.

·         Spare available any time against full payment.

Additional Information:

• Production Capacity: up to 200 kg /8Hr. (Depends on Materials Quality)
• Delivery Time: 15 days
• Packaging Details: Wooden Box Packing

·         Machine Speed: up to 2000 batch/HR. (Depends on size & Qty).
·         Suitable only for machine made equal size incense.
·         Electric control panel With Stepper motor & PLC.
·         Machine Auto stop when raw incense finish.
·         Req. Power: 0.5 HP
·         Compressor: 1.5 HP (Your Scope)
·         Length of Incense: 8” to 10”
·         Diameter of Incense: 3 mm to 5 mm.
·         No. of sticks: 5 to 100 sticks/batch.
·         Machine weight: @100 Kg.
·         Free: Training of machine operation and general maintenance at our surat factory.
·         Free: 1 tool set
·         Warranty: 9 months in PLC and stepper motor.
·         This machine designed by our Engineer.
·         This machine is produced by our technical staff.
·         (Not import from another country.)
·         Easy to operate & low maintenance.
·         Telephonic service free for life time (Monday To Saturday 9 AM to 6 PM, Sunday Weekly off) service will be discontinue if you use other company’s  spare in this machine
Spare available any time against full payment

 

 

 

 

 

 

 

 

 

 

 

 

 

Additional Information:

• Production Capacity: up to 2000 batch/HR. (Depends on size & Qty).
• Delivery Time: 15 days
• Packaging Details: Wooden Box Packing

·         Machine Speed: up to 2000 batch/HR. (Depends on size & Qty).
·         Suitable only for machine made equal size incense.
·         Electric control panel With Stepper motor & PLC.
·         Machine Auto stop when raw incense finish.
·         Req. Power: 0.5 HP
·         Compressor: 1.5 HP (Your Scope)
·         Length of Incense: 8” to 10”
·         Diameter of Incense: 3 mm to 5 mm.
·         No. of sticks: 5 to 100 sticks/batch.
·         Machine weight: @100 Kg.
·         Free: Training of machine operation and general maintenance at our surat factory.
·         Free: 1 tool set
·         Warranty: 9 months in PLC and stepper motor.
·         This machine designed by our Engineer.
·         This machine is produced by our technical staff.
·         (Not import from another country.)
·         Easy to operate & low maintenance.
·         Telephonic service free for life time (Monday To Saturday 9 AM to 6 PM, Sunday Weekly off) service will be discontinue if you use other company’s  spare in this machine
Spare available any time against full payment

 

 

 

 

 

 

 

 

 

 

 

 

 

Additional Information:

• Production Capacity: up to 2000 batch/HR. (Depends on size & Qty).
• Delivery Time: 15 days
• Packaging Details: Wooden Box Packing

AUTOMATIC PVC PIPE BENDING MACHINE (4 CAVITY)
Machine design and working theory copyright by sohamtex engineers
 First time in India
 Machine speed: 800-900 pieces /HR. (Depend on Size)
 Pneumatic based PVC pipe bending machine.
 Required power for machine: 2 HP Signal Phase
 Compressor: 10 HP (Your Scope Three Phase)
 Total power for machine: 12 HP 3 Phase
 Length of Pipe: 160 mm to 225 mm
 Diameter: 19mm to 25mm (Inbuilt 1 die-set)
 Thickness for 19 & 20 mm: 1.2 mm
 Thickness for 25 mm: 1.5 mm
 Machine type: Fully automatic
 Bending: 90 Degree
 Socketing: both sides Machine length: 8*5*4
 PLC based automatic controller With HMI  Machine weight: 350Kg
 Cost per bend: 0.20 Rs./ Bend
 Free: Training of machine operation and general maintenance.
Free inbuilt 1 die-set free with machine.
 Warranty: 9 months in PLC, HMI and Temperature Controller.
 This machine designed by our Engineer.
 Easy to operate & low maintenance.
Made in India

Additional Information:

• Production Capacity: 800-900 pieces /HR. (Depend on Size)
• Delivery Time: 40 days
• Packaging Details: Wooden Box

Automatic PVC Pipe Bending Machine 4 Cavity

MMachine design and working theory copy right by sohamtex engineers·

First time in India

· Machine speed:800-900pieces /HR.(Depend on Size)

· Pneumatic based PVC pipe bending machine.

· Required power for machine:2HPSignal Phase

· Compressor:10 HP (Your Scope Three Phase)

· Total power for machine: 12 HP 3 Phase

· Length of Pipe:160 mm to 225 mm

· Diameter:19mm to 25mm(Inbuilt 1 die-set)

· Thicknessfor 19 &20 mm: 1.2 mm

· Thickness for 25 mm: 1.5 mm

· Machine type: Fully automatic

· Bending: 90 Degree

· Socketing: both sides

· Machine length:8*5*4

· PLC based automatic controller With HMI.

· Machine weight:350Kg

· Cost per bend:0.20 Rs./ Bend

· Free: Training of machine operation and general maintenance.
Free inbuilt 1 die-set free with machine.

· Warranty: 9 months in PLC, HMI and Temperature Controller.

· This machine designed by our Engineer.

· Easy to operate & low maintenance.

Made in India

Additional Information:

• Production Capacity: 800-900 pieces /HR.
• Delivery Time: 40 days

AUTOMATIC PVC PIPE BENDING MACHINE

Beware from duplication and cheater.

Machine Design copyright by Sohamtex engineers

Nobody our Ex-partner.

· First time in India
· Machine speed: 450 pieces /HR.
· Pneumatic based PVC pipe bending machine.
· Required power for machine: 1 HP 3 Phase
· Compressor: 7.5 HP (Your Scope)
· Total power for machine: 8.5 HP 3 Phase
· Length of Pipe: 160 mm to 175 mm
· Diameter: 19mm to 25mm(Only one)
· Thickness: 1.5mm to 2.mm
· Machine type: Fully automatic
· Bending: 90 Degree
· Socketing: both sides
· Machine length: 6*4*4
· PLC based automatic controller With HMI.
· Machine weight: 250Kg
· Free: Training of machine operation and general maintenance.
Free1 die-set free with machine.
· Warranty: 9 months in PLC, HMI and Temperature Controller.
· This machine designed by our Engineer.
· This machine is produced by our technical staff.
· (Not import from another country.)
· Easy to operate & low maintenance.

Made in India

Additional Information:

• Item Code: Pvcpipeisi
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Nahvaseva
• Production Capacity: 3200 Pcs/ 8 HR
• Delivery Time: 10 Days
• Packaging Details: Wooden Box Packing

AUTOMATIC PVC PIPE BENDING MACHINE (4 CAVITY)

Machine design and working theorycopyrightby sohamtex engineers

· First time in India

· Machine speed:800-900pieces /HR.(Depend on Size)

· Pneumatic based PVC pipe bending machine.

· Required power for machine:2HPSignal Phase

· Compressor:10 HP (Your Scope Three Phase)

· Total power for machine: 12 HP 3 Phase

· Length of Pipe:160 mm to 225 mm

· Diameter:19mm to 25mm(Inbuilt 1 die-set)

· Thicknessfor 19 &20 mm: 1.2 mm

· Thickness for 25 mm: 1.5 mm

· Machine type: Fully automatic

· Bending: 90 Degree

· Socketing: both sides

· Machine length:8*5*4

· PLC based automatic controllerWith HMI.

· Machine weight:350Kg

· Cost per bend:0.20 Rs./ Bend

· Free: Training of machine operation and general maintenance.
Free inbuilt 1 die-set free with machine.

· Warranty: 9 months in PLC, HMI and Temperature Controller.

· This machine designed by our Engineer.

· Easy to operate & low maintenance.

Made in India

Additional Information:

• Production Capacity: 800-900pieces /HR.(Depend on Size)
• Delivery Time: 40 days
• Packaging Details: Wooden Box

AUTOMATIC PVC PIPE BENDING MACHINE (4 CAVITY)
Machine design and working theory copyright by sohamtex engineers
 First time in India
  Machine speed: 800-900 pieces /HR. (Depend on Size)
 Pneumatic based PVC pipe bending machine.
  Required power for machine: 2 HP Signal Phase
  Compressor: 10 HP (Your Scope Three Phase)
 Total power for machine: 12 HP 3 Phase
 Length of Pipe: 160 mm to 225 mm
 Diameter: 19mm to 25mm (Inbuilt 1 die-set)
 Thickness for 19 & 20 mm: 1.2 mm
 Thickness for 25 mm: 1.5 mm
 Machine type: Fully automatic
 Bending: 90 Degree
 Socketing: both sides
 Machine length: 8*5*4
 PLC based automatic controller With HMI.
 Machine weight: 350Kg
 Cost per bend: 0.20 Rs./ Bend
 Free: Training of machine operation and general maintenance.
Free inbuilt 1 die-set free with machine.
 Warranty: 9 months in PLC, HMI and Temperature Controller.
 This machine designed by our Engineer.
 Easy to operate & low maintenance.
Made in India

Additional Information:

• Production Capacity: 800-900 pieces /HR. (
• Delivery Time: 40 days
• Packaging Details: Wooden Box

AUTOMATIC PVC PIPE BENDING MACHINE
Machine design copyright and working theory by sohamtex engineers
 First time in India
 Machine speed: 400-450 pieces /HR. (Depend on Size)
 Pneumatic based PVC pipe bending machine.
 Required power for machine: 1 HP Signal Phase
 Compressor: 7.5 HP (Your Scope Three Phase)
 Total power for machine: 8.5 HP 3 Phase
 Length of Pipe: 160 mm to 175 mm
 Diameter: 19mm to 25mm (Inbuilt 1 die-set)
 Thickness for 19 & 20 mm: 1.2 mm
 Thickness for 25 mm: 1.5 mm
 Machine type: Fully automatic
 Bending: 90 Degree
 Socketing: both sides
 Machine length: 6*4*4
 PLC based automatic controller With HMI.
 Machine weight: 250Kg
 Free: Training of machine operation and general maintenance.
Free inbuilt 1 die-set free with machine.
 Warranty: 9 months in PLC, HMI and Temperature Controller.
 This machine designed by our Engineer.
 Easy to operate & low maintenance.

Additional Information:

• Production Capacity: 400-450 pieces /HR. (Depend on Size)
• Delivery Time: 40 days
• Packaging Details: Wooden Box

AUTOMATIC PVC PIPE BENDING MACHINE (4 CAVITY)
(Without oil)
Machine design and working theory copyright by sohamtex engineers
 First time in India
 Machine speed: 600-650 pieces /HR. (Depend on Size)
 Pneumatic based PVC pipe bending machine.
 Required power for machine: 3 HP Three Phase
 Compressor: 10 HP (Your Scope Three Phase)
 Total power for machine: 13 HP 3 Phase
 Length of Pipe: 160 mm to 225 mm
 Diameter: 19mm to 25mm (Inbuilt 1 die-set, in one machine you can used only one size)
 Thickness for 19 & 20 mm: 1.2 mm
 Thickness for 25 mm: 1.5 mm
 Machine type: Fully automatic
 Bending: 90 Degree
 Socketing: both sides
 Machine length: 8*5*4
 PLC based automatic controller With HMI.
 Machine weight: 350Kg
 Cost per bend: 0.40 Rs./ Bend
 Free: Training of machine operation and general maintenance. Free inbuilt 1 die-set free with machine.
 Warranty: 9 months in PLC, HMI and Temperature Controller.
 This machine designed by our Engineer.
 Easy to operate & low maintenance.
Made in India

Additional Information:

• Production Capacity: 600-650 pieces /HR. (Depend on Size)
• Delivery Time: 45 days
• Packaging Details: wooden box

AUTOMATIC PVC PIPE BENDING MACHINE (2 CAVITY)
Machine design and working theory copyright by sohamtex engineers
 First time in India
 Machine speed:500-550pieces /HR.(Depend on Size& Quality)
 Pneumatic based PVC pipe bending machine.
 Machine type: Fully automatic
 Required power for machine:1HPSignal Phase
 Compressor:7.5 HP Three Phase(Client’s Scope)
 Total power for machine: 8.5 HP 3 Phase
 Length of Pipe: as per your sample & approval
 Pipe Quality: ISI & Non-ISI
 Diameter:19, 20 & 25 mm(Inbuilt 1 die-set)
 Thickness for 19 &20 mm: Not below 1.2 mm
 Thickness for 25 mm: Not Below 1.5 mm
 Bending: 90 Degree (as per your requirement)
 Socketing: both sides
 Machine length:6*5*5 Feet
 PLC based automatic controller With HMI.
 Machine weight:250Kg
 Cost per bend:0.25 Rs./ Bend
 Free: Training of machine operation and general maintenance.
Free inbuilt 1 die-set free with machine.
 Warranty: 9 months in PLC, HMI and Temperature Controller.
 This Service Discontinue If Used Other Company Spare in Our Machine
 Lifetime Telephonic technical support free after sales (Monday To Saturday 9 AM to 6
PM, Sunday Weekly off.
 Payable service available any time.
 This machine Designed by our Engineer.
 Easy to operate & low maintenance.
Made in India

Additional Information:

• Production Capacity: 500-550pieces /HR.(Depend on Size& Quality)
• Delivery Time: 45 days
• Packaging Details: wooden box

AUTOMATIC PVC PIPE BENDING MACHINE (2 CAVITY, Without Oil)
Machine design and working theory copyright by sohamtex engineers
 First time in India
 Machine speed:370-420 pieces /HR.(Depend on Size& Pipe quality)
 Pneumatic based PVC pipe bending machine.
 No required any type of Oil, water & liquid in machine.
 Required power for machine:2HP Signal Phase
 Compressor:7.5 HP Three Phase(Client’s Scope)
 Total power for machine: 9.5 HP 3 Phase
 Pipe Quality: ISI &Non-ISI
 Length of Pipe:as per your sample & approval.
 Diameter:19, 20 & 25mm(Inbuilt 1 die-set)
 Thicknessfor 19 &20 mm: Not below 1.2 mm
 Thickness for 25 mm: Not Below 1.5 mm
 Machine type: Fully automatic
 Bending: 90 Degree (as per your requirement)
 Socketing: both sides
Machine length:6*5*5 Feet
 PLC based automatic controllerwith HMI.
 Machine weight:250Kg
 Cost per bend:0.30Rs. / Bend
 Free: Training of machine operation and general maintenance. Free inbuilt 1 die-set free with machine.
 Warranty: 9 months in PLC, HMI and Temperature Controller.
 This machine designed by our Engineer.
 This Service Discontinue If Used other Company spare in our Machine.
 Lifetime Telephonic technical support free after sales (Monday To Saturday 9 AM to 6 PM, Sunday Weekly off.
 Payable service available any time.
 Easy to operate & low maintenance.
 Made in India

Additional Information:

• Production Capacity: 370-420 pieces /HR.(Depend on Size& Pipe quality) ¿¿¿
• Delivery Time: 45 days
• Packaging Details: wooden box

AUTOMATIC PVC PIPE BENDING MACHINE MEDIUM MODEL(2 CAVITY)

Machine design and working theory copyright by sohamtex

engineers

 First time in India

 Machine speed: 350-400 pieces /HR. (Depend on Size)

 Pneumatic based PVC pipe bending machine.

 Required power for machine: 1 HP Signal Phase

 Compressor: 7.5 HP (Your Scope Three Phase)

 Total power for machine: 8.5 HP 3 Phase

 Length of Pipe: 160 mm to 225 mm

 Diameter: 19mm to 32mm (Inbuilt 1 die-set)

 Thickness for 19 & 20 mm: 1.2 mm

 Thickness for 25 & 32 mm: 1.5 mm

 Machine type: Fully automatic

 Bending: 90 Degree

 Socketing: both sides

 Machine length: 6*4*4

 PLC based automatic controller With HMI.

 Machine weight: 250Kg

 Cost per bend: 0.25 Rs./ Bend

 Free: Training of machine operation and general maintenance.

Free inbuilt 1 die-set free with machine.

 Warranty: 9 months in PLC, HMI and Temperature Controller.

 This machine designed by our Engineer.

 Easy to operate & low maintenance.

Made in India

 

Additional Information:

• Production Capacity: 350-400 pieces /HR. (Depend on Size)
• Delivery Time: 40 days
• Packaging Details: Wooden Box

AUTOMATIC STEP OVER BENDING MACHINE (UPVC & CPVC)
Machine design copyright by sohamtex engineers
 First time in world
 Machine speed: 200 pieces /HR. (Depend on Size)
 Pneumatic based UPVC & CPVC pipe bending machine.
 Required power for machine: 1 HP Signal Phase
 Compressor: 10 HP (Your Scope Three Phase)
 Total power for machine: 11 HP 3 Phase
 Length of Pipe: 200 mm to 300 mm
 Diameter: ½” to 1 ¼ “
 Thickness: 2 mm to 4 mm (Only ISI)
 Machine type: Fully automatic
  Socketing: both sides
 Machine Size: 8 * 6 * 5
 PLC based automatic controller With HMI.
 Machine weight: 300 Kg
 Free: Training of machine operation and general maintenance.
 Warranty: 9 months in PLC, HMI and Temperature Controller.
 This machine designed by our Engineer.
 This machine is produced by our technical staff.
 (Not import from another country.)
 Easy to operate & low maintenance.
Made in India

Additional Information:

• Production Capacity: 200pieces /HR.(Depend on Size)
• Delivery Time: 60 days
• Packaging Details: wooden box

·       First time in India

·       Machine speed:  50-80 pieces /HR.(Depend on Size& Quality)

·       Pneumatic based machine.

·       Machine type: Fully automatic

·       Required power for machine:2 HP 3 Phase

·       Compressor:3 HP Three Phase (Client’s Scope)

·       Total power for machine:5 HP 3 Phase

·       Length of Pipe : 8 To 18 inch

·       Pipe Quality: ISI & Non-ISI

·       Diameter: Dia  ½”, 3/4”,1” (20,26.5,33.25 mm)

·       Thickness :4 To 5 mm

·       Machine size : 68x50x56 inches

·       PLC based automatic controller With HMI.

·       Machine weight: 320 kg

·       Free: Training of machine operation and general maintenance at surat.

·       Warranty: 9 months in PLC, HMI and Temperature Controller.

·       Lifetime Telephonic technical support free after sales (Monday To Saturday 9 AM to 6 PM, Sunday Weekly off).This service discontinue if used other company’s spare in our machine

·       Payable service available any time.

·       This machine designed by our Engineer.

·       Easy to operate & low maintenance.

Additional Information:

• Production Capacity: 50-80 pieces /HR.(Depend on Size& Quality)
• Delivery Time: 30 days
• Packaging Details: Wooden box Packing

• ·       First time in India
• ·       Machine speed:  50-80 pieces /HR.(Depend on Size& Quality)
• ·       Pneumatic based machine.
• ·       Machine type: Fully automatic
• ·       Required power for machine:2 HP 3 Phase
• ·       Compressor:3 HP Three Phase (Client’s Scope)
• ·       Total power for machine:5 HP 3 Phase
• ·       Length of Pipe : 8 To 18 inch
• ·       Pipe Quality: ISI & Non-ISI
• ·       Diameter: Dia  ½”, 3/4”,1” (20,26.5,33.25 mm)
• ·       Thickness :4 To 5 mm
• ·       Machine size : 68x50x56 inches
• ·       PLC based automatic controller With HMI.
• ·       Machine weight: 320 kg
• ·       Free: Training of machine operation and general maintenance at surat.
• ·       Warranty: 9 months in PLC, HMI and Temperature Controller.
• ·       Lifetime Telephonic technical support free after sales (Monday To Saturday 9 AM to 6 PM, Sunday Weekly off).This service discontinue if used other company’s spare in our machine
• ·       Payable service available any time.
• ·       This machine designed by our Engineer.
• ·       Easy to operate & low maintenance.
• Made in India

Additional Information:

• Production Capacity: 50-80 pieces /HR.(Depend on Size& Quality)
• Delivery Time: 30 days
• Packaging Details: Wooden box packing

Machine design and working theory copyright by sohamtex engineers 

· First time in India

· Machine speed:370 - 420 /HR.(Depend on Size)

· Pneumatic based PVC pipe bending machine.

· Required power for machine:2 HP Signal Phase

· Compressor:7.5 HP (Your Scope Three Phase)

· Total power for machine: 9.5 HP 3 Phase

· Length of Pipe:As per your sample & Approval.

· Diameter:19mm ,20 mm & 25mm(Inbuilt 1 die-set)

· Thicknessfor 19 &20 mm: Not Below 1.2 mm

· Thickness for 25 mm: Not Below 1.5 mm

· Machine type: Fully automatic

· Bending: 90 Degree

· Socketing: both sides

· Machine length:6*5*5

· PLC based automatic controller With HMI.

· Machine weight:250Kg

· Cost per bend:0.30 Rs./ Bend

· Free: Training of machine operation and general maintenance.
Free inbuilt 1 die-set free with machine.

· Warranty: 9 months in PLC, HMI and Temperature Controller.

· This machine designed by our Engineer.

· Easy to operate & low maintenance.

Made in India 

 

Additional Information:

• Production Capacity: 370 - 420 pieces /HR.(Depend on Size)
• Delivery Time: 40 Days
• Packaging Details: Wooden Box

AUTOMATIC PVC PIPE BENDING MACHINE WITHOUT OIL

Theory copyright by sohamtex engineers

First time in India

• Machine speed:370 - 420 pieces /HR.(Depend on Size)
• Pneumatic based PVC pipe bending machine.
• Required power for machine:2 HP Signal Phase
• Compressor:7.5 HP (Your Scope Three Phase)
• Total power for machine: 9.5 HP 3 Phase
• Length of Pipe:As Per Your Sample & Approval.
• Diameter:19mm ,20 mm & 25mm(Inbuilt 1 die-set)
• Thicknessfor 19 &20 mm: 1.2 mm
• Thickness for 25 mm: 1.5 mm
• Machine type: Fully automatic
• Bending: 90 Degree
• Socketing: both sides
• Machine length:6*5*5 Feet
• PLC based automatic controllerWith HMI.
• Machine weight:250Kg
• Cost per bend:0.30 Rs./ Bend
• Free: Training of machine operation and general maintenance.
• Free inbuilt 1 die-set free with machine.
• Warranty: 9 months in PLC, HMI and Temperature Controller.
• This machine designed by our Engineer.

• Lifetime Telephonic technical support free after sales (Monday To Saturday 9 AM to 6 PM, Sunday Weekly off.
• Easy to operate & low maintenance.

Made in India 

Additional Information:

• Production Capacity: 370 - 420 pieces /HR.(Depend on Size)
• Delivery Time: 40 Days
• Packaging Details: Wooden Box

Machine Design and working Theory copyright by sohamtex engineers

•  First time in India
•  Machine speed: 800-900 pieces /HR. (Depend on Size)
•  Pneumatic based PVC pipe bending machine.
•  Required power for machine: 2 HP Signal Phase
•  Compressor: 10 HP (Your Scope Three Phase)
•  Total power for machine: 12 HP 3 Phase
•  Length of Pipe: 160 mm to 225 mm
•  Diameter: 19mm to 25mm (Inbuilt 1 die-set)
•  Thickness for 19 & 20 mm: 1.2 mm
•  Thickness for 25 mm: 1.5 mm
•  Machine type: Fully automatic
•  Bending: 90 Degree
•  Socketing: both sides
•  Machine length: 8*5*4
•  PLC based automatic controller With HMI.
•  Machine weight: 350Kg
•  Cost per bend: 0.20 Rs./ Bend
•  Free: Training of machine operation and general maintenance.
• Free inbuilt 1 die-set free with machine.
•  Warranty: 9 months in PLC, HMI and Temperature Controller. This machine designed by our Engineer.
•  Easy to operate & low maintenance.

Made in India

Additional Information:

• Production Capacity: 800-900 pieces /HR.
• Delivery Time: 40 days

Machine Design and working Theory copyright by sohamtex Engineers
First time in India

• Machine Speed: 800-900 pieces /HR. (Depend on Size)
• Pneumatic Based PVC pipe Bending Machine.
• Required power for Machine: 2 HP Signal Phase
• Compressor: 10 HP (Your Scope Three Phase)
• Total power for machine: 12 HP 3 Phase
• Length of Pipe: 160 mm to 225 mm
• Diameter: 19mm to 25mm (Inbuilt 1 die-set)
• Thickness for 19 & 20 mm: 1.2 mm
• Thickness for 25 mm: 1.5 mm
• Machine type: Fully automatic
• Bending: 90 Degree
• Socketing: both sides
• Machine length: 8*5*4
• PLC based automatic controller With HMI.
• Machine weight: 350Kg
• Cost per Bend: 0.20 Rs./ Bend
• Free: Training of machine operation and general maintenance. Free inbuilt 1 Die-set free with machine.
• Warranty: 9 months in PLC, HMI and Temperature controller.
• This machine designed by our Engineer.
• Easy to operate & low maintenance.
• Made in India

Additional Information:

• Production Capacity: 325 ¿¿¿ 425 Kg./ 8 HR (depends on size
• Delivery Time: 40 days

Machine Design and working Theory copyright by sohamtex Engineers
 First time in India
 Machine speed: 800-900 pieces /HR. (Depend on Size)
 Pneumatic based PVC pipe Bending Machine.
 Required Power for Machine: 2 HP Signal Phase
 Compressor: 10 HP (Your Scope Three Phase)
 Total power for machine: 12 HP 3 Phase
 Length of Pipe: 160 mm to 225 mm
 Diameter: 19mm to 25mm (Inbuilt 1 die-set)
 Thickness for 19 & 20 mm: 1.2 mm
 Thickness for 25 mm: 1.5 mm
 Machine type: Fully automatic
 Bending: 90 Degree
 Socketing: Both sides
 Machine Length: 8*5*4
 PLC Based Automatic controller With HMI.
 Machine Weight: 350Kg
 Cost per Bend: 0.20 Rs./ Bend
 Free: Training of Machine Operation and General Maintenance. Free inbuilt 1 Die-set free with machine.
 Warranty: 9 months in PLC, HMI and Temperature Controller.
 This machine Designed by our Engineer.
??? Easy to operate & low maintenance.
Made in India

Additional Information:

• Production Capacity: 800-900 pieces /HR. (Depend on Size)
• Delivery Time: 40 days

Automatic PVC Pipe Bending 900 pieces

• Machine Design and Working Theory copyright by sohamtex engineers
•  First Time in India
•  Machine speed: 800-900 pieces /HR. (Depend on Size)
•  Pneumatic Based PVC Pipe Bending machine.
•  Required power for Machine: 2 HP Signal Phase
•  Compressor: 10 HP (Your Scope Three Phase)
•  Total power for Machine: 12 HP 3 Phase
•  Length of Pipe: 160 mm to 225 mm
•  Diameter: 19mm to 25mm (Inbuilt 1 die-set)
•  Thickness for 19 & 20 mm: 1.2 mm
•  Thickness for 25 mm: 1.5 mm
•  Machine type: Fully Automatic
•  Bending: 90 Degree
•  Socketing: Both sides
•  Machine Length: 8*5*4
•  PLC Based Automatic controller With HMI.
•  Machine Weight: 350Kg
•  Cost per Bend: 0.20 Rs./ Bend
•  Free: Training of Machine operation and General Maintenance. Free inbuilt 1 Die-set free with machine.
•  Warranty: 9 months in PLC, HMI and Temperature Controller.
•  This machine designed by our Engineer.
•  Easy to operate & low maintenance.

Made in India

Additional Information:

• Production Capacity: 800-900 pieces /HR. (Depend on Size)
• Delivery Time: 40 days

AUTOMATIC PVC PIPE BENDING MACHINE (4 CAVITY)
Machine Design and working theory copy right by sohamtex engineers
First time in India

• Machine speed: 800-900 pieces /HR. (Depend on Size)
• Pneumatic based PVC pipe bending machine.
• Required power for machine: 2 HP Signal Phase
• Compressor: 10 HP (Your Scope Three Phase)
• Total power for machine: 12 HP 3 Phase
• Length of Pipe: 160 mm to 225 mm
• Diameter: 19mm to 25mm (Inbuilt 1 die-set)
• Thickness for 19 & 20 mm: 1.2 mm
• Thickness for 25 mm: 1.5 mm
• Machine type: Fully automatic
• Bending: 90 Degree
• Socketing: both sides
• Machine length: 8*5*4
• PLC based automatic controller With HMI.
• Machine weight: 350Kg
• Cost per bend: 0.20 Rs./ Bend
• Free: Training of machine operation and general maintenance. Free inbuilt 1 die-set free with machine.
• Warranty: 9 months in PLC, HMI and Temperature Controller.
• This machine designed by our Engineer.
• Easy to operate & low maintenance.

Made in India

Additional Information:

• Production Capacity: 800-900 pieces /HR. (Depend on Size)
• Delivery Time: 40 days

Production: up to 900 tying/ Hr.(Depends on operator)
Electric control by PLC
Req. Power for machine: 2.5 HP (Single phase)
Required Air point
Machine weight: @180 Kg.
Machine Size: 24x20x41 inch ( LxBxH)
Conveyor size: 15 x 84 x 18 inches
Automatic bundling.
Maximum bundle dia : 100 mm
Free: Training of machine operation and general Maintenance at Surat factory.
Free: 1 tool set.
Warranty: 9 months in Main motor, PLC & Gearbox.
All parts and aggregates are produced by us and the internal working method is copyright by sohamtex engineers. 
Telephonic service free for life time (Monday to Saturday 9 AM to 6 PM, Sunday Weekly off) service will be discontinue if you use other company’s spare in this machine.
 Spare available any time against full payment.
Easy to operate & low maintenance

Additional Information:

• Production Capacity: up to 900 tying/ Hr.(Depends on operator)
• Delivery Time: 30 days
• Packaging Details: Wooden box packing

Machine design and working theory copyright by sohamtex engineers

·     First time in India

·    Machine speed:500-550pieces /HR.(Depend on Size& Quality)

·      Pneumatic based PVC pipe bending machine.

·     Machine type:  Fully automatic

·     Required power for machine:1HPSignal Phase

·    Compressor:7.5 HP Three Phase(Client’s Scope)

·      Total power for machine: 8.5 HP 3 Phase

·      Length of Pipe:as per your sample & approval

·      Pipe Quality: ISI & Non-ISI

·      Diameter:19, 20 & 25 mm(Inbuilt 1 die-set)

·      Thickness for 19 &20 mm: Not below 1.2 mm

·      Thickness for 25 mm: Not Below 1.5 mm

·      Bending: 90 Degree (as per your requirement)

·      Socketing: both sides

·      Machine length:6*5*5 Feet

·     PLC based automatic controllerWith HMI.

·     Machine weight:250Kg

·    Cost per bend:0.25 Rs./ Bend

·     Free: Training of machine operation and general maintenance.
Free inbuilt 1 die-set free with machine.

·    Warranty: 9 months in PLC, HMI and Temperature Controller.

Lifetime Telephonic technical support free after sales (Monday To Saturday 9 AM to 6 PM, Sunday Weekly off.Payable service available any time.

·     This machine designed by our Engineer.

·      Easy to operate & low maintenance.

Made in India

Additional Information:

• Production Capacity: 500-550 pieces /HR.(Depend on Size)
• Delivery Time: 40 days
• Packaging Details: Wooden Box

We are one the leading manufacturer and supplier of

Beware from duplication and cheater.

Nobody our Ex-partner

Machine design copyright by sohamtex engineers

· First time in India

· Machine speed:400-450pieces /HR.(Depend on Size)

· Pneumatic based PVC pipe bending machine.

· Required power for machine:1HPSignal Phase

· Compressor: 7.5 HP (Your Scope Three Phase)

· Total power for machine: 8.5 HP 3 Phase

· Length of Pipe:160 mm to 175 mm

· Diameter:19mm to 25mm(Inbuilt 1 die-set)

· Thickness: 1.5mm to 2.mm (Only ISI)

· Machine type: Fully automatic

· Bending: 90 Degree

· Socketing: both sides

· Machine length: 6*4*4

· PLC based automatic controller With HMI.

· Machine weight: 250Kg

· Free: Training of machine operation and general maintenance.
Free inbuilt 1 die-set free with machine.

· Warranty: 9 months in PLC, HMI and Temperature Controller.

· This machine designed by our Engineer.

· This machine is produced by our technical staff.

· (Not import from another country.)

· Easy to operate & low maintenance.

Made in India

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Nahvseva
• Production Capacity: 3200 pcs / 8 Hour
• Delivery Time: 10 Days
• Packaging Details: Wooden Box Packing

AUTOMATIC PVC PIPE BENDING MACHINE (2 CAVITY)

Machine design and working theory copyrightby sohamtex engineers

First time in India

• Machine speed:500-550 pieces /HR.(Depend on Size)
• Pneumatic based PVC pipe bending machine.
• Required power for machine:1 HP Signal Phase
• Compressor:7.5 HP (Your Scope Three Phase)
• Total power for machine: 8.5 HP 3 Phase
• Length of Pipe:As per Your Sample & Approval
•  Diameter:19mm ,20mm & 25mm(Inbuilt 1 die-set)
• Thicknessfor 19 &20 mm: 1.2 mm
• Thickness for 25 mm: 1.5 mm
• Machine type: Fully automatic
• Bending: 90 Degree
• Socketing: both sides
• Machine length:6*5*5
• PLC based automatic controllerWith HMI.
• Machine weight:250Kg
• Cost per bend:0.25Rs./ Bend
• Free: Training of machine operation and general maintenance.
  Free inbuilt 1 die-set free with machine.
• Warranty: 9 months in PLC, HMI and Temperature Controller.
• This machine designed by our Engineer.
• Easy to operate & low maintenance.

Made in India

Additional Information:

• Production Capacity: 500-550pieces /HR.(Depend on Size)
• Delivery Time: 40 days
• Packaging Details: Wooden Box

·         Machine speed: 50-70 pieces /HR.(Depend on labor & pipe Quality)

·         Machine type: Manual

·         Required power for machine:2 HP Signal Phase

·         Compressor: 3 HP 3 Phase (Client’s Scope)

·         Total power for machine: 5 HP, 3 Phase

·         Length of Pipe: as per your sample & approval

·         Pipe Quality: ISI & Non-ISI

·         Diameter:32, 40 & 50 mm (Inbuilt 1 die-set, suitable for only 2 die)

·         Require Thickness for 32 mm: minimum 3 mm

·         Require Thickness for 40 mm: minimum 3.2 mm

·         Require Thickness for 50 mm: minimum 3.5 mm

·         Bending: 90 Degree (as per your requirement)

·         Oil Heating Chamber (Extra charge 35000/-)(oil chamber)

·         Socketing: both sides

·         Machine Size : 65 x 37 x 67

·         Machine weight: @ 350 kg

·         Free: Training of machine operation and general maintenance at surat.

·         Warranty: 9 months in Temperature Controller & timer.

·         Lifetime Telephonic technical support free after sales (Monday To Saturday 9 AM to 6 PM, Sunday Weekly off).This service discontinue if used other company’s spare in our machine

·         Payable service available any time.

·         This machine designed by our Engineer.

·         Easy to operate & low maintenance.

·         Made in India

Additional Information:

• Production Capacity: 50-70 pieces /HR.(Depend on labor & pipe Quality)
• Delivery Time: 45 DAYS
• Packaging Details: Wooden box packing

·         Machine speed: 50-70 pieces /HR.(Depend on labor & pipe Quality)

·         Machine type: Manual

·         Required power for machine:2 HP Signal Phase

·         Compressor: 3 HP 3 Phase (Client’s Scope)

·         Total power for machine: 5 HP, 3 Phase

·         Length of Pipe: as per your sample & approval

·         Pipe Quality: ISI & Non-ISI

·         Diameter:32, 40 & 50 mm (Inbuilt 1 die-set, suitable for only 2 die)

·         Require Thickness for 32 mm: minimum 3 mm

·         Require Thickness for 40 mm: minimum 3.2 mm

·         Require Thickness for 50 mm: minimum 3.5 mm

·         Bending: 90 Degree (as per your requirement)

·         Oil Heating Chamber (Extra charge 35000/-)(oil chamber)

·         Socketing: both sides

·         Machine Size : 65 x 37 x 67

·         Machine weight: @ 350 kg

·         Free: Training of machine operation and general maintenance at surat.

·         Warranty: 9 months in Temperature Controller & timer.

·         Lifetime Telephonic technical support free after sales (Monday To Saturday 9 AM to 6 PM, Sunday Weekly off).This service discontinue if used other company’s spare in our machine

·         Payable service available any time.

·         This machine designed by our Engineer.

·         Easy to operate & low maintenance.

·         Made in India

Additional Information:

• Production Capacity: 50-70 pieces /HR.(Depend on labor & pipe Quality)
• Delivery Time: 45 days
• Packaging Details: Wooden box packing

AUTOMATIC PVC PIPE BENDING MACHINE
Beware from duplication and cheater.
Nobody our Ex-partner
Machine design copyright by sohamtex engineers
· First time in India
· Machine speed:400-450pieces /HR.(Depend on Size)
· Pneumatic based PVC pipe bending machine.
· Required power for machine:1HPSignal Phase
· Compressor: 7.5 HP (Your Scope Three Phase)
· Total power for machine: 8.5 HP 3 Phase
· Length of Pipe:160 mm to 175 mm
· Diameter:19mm to 25mm(Inbuilt 1 die-set)
· Thickness: 1.5mm to 2.mm (Only ISI)
· Machine type: Fully automatic
· Bending: 90 Degree
· Socketing: both sides
· Machine length: 6*4*4
· PLC based automatic controller With HMI.
· Machine weight: 250Kg
· Free: Training of machine operation and general maintenance.
Free inbuilt 1 die-set free with machine.
· Warranty: 9 months in PLC, HMI and Temperature Controller.
· This machine designed by our Engineer.
· This machine is produced by our technical staff.
· (Not import from another country.)
· Easy to operate & low maintenance.
Made in India

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Nhavseva
• Production Capacity: 450 Pc Pipe Bending 1 Hr.
• Delivery Time: 10 Days
• Packaging Details: Wooden Box Packing

• Dimension: 460x260x380mm
• Power: 180W
• Bundling Scope: 220*180mm
• Machine speed: 3s/time
• Tape width: 10-15mm
• Tighten Strength: 10-120N
• Net weight: 13.5 kg
• Smooth Running.
• Telephonic service free for life time (Monday to Saturday 9 AM to 6 PM, Sunday Weekly off) service will be discontinue if you use other company’s spare in this machine.
• Spare available any time against full payment.
• Made in India.
  
  

Additional Information:

• Production Capacity: 3s/time
• Delivery Time: 20 days
• Packaging Details: Wooden Box Packing

• Dimension: 460x260x380mm
• Power: 180W
• Bundling Scope: 220*180mm
• Machine speed: 3s/time
• Tape width: 10-15mm
• Tighten Strength: 10-120N
• Net weight: 13.5 kg
• Smooth Running.
• Telephonic service free for life time (Monday to Saturday 9 AM to 6 PM, Sunday Weekly off) service will be discontinue if you use other company’s spare in this machine.
• Spare available any time against full payment.
• Made in India.
  
  

 

 

Additional Information:

• Production Capacity: 3s/time
• Delivery Time: 20 days
• Packaging Details: Wooden Box Packing

·        Pouch sealing size up to 18 inches

·        Required power: 1 phase 0.25 hp

·        Machine weight: @ 15 kg                                  

·        Require space :1.5 x 1.5x 3.5 feet

·        Easy to operate & low maintenance.

·        Telephonic service free for life time

·        (Monday to Saturday 9 AM to 6 PM, Sunday Weekly off) service discontinue if used other company’s spare in our machine.

Additional Information:

• Delivery Time: 5 days
• Packaging Details: Wooden box packing

·        Pouch sealing size up to 18 inches

·        Required power: 1 phase 0.25 hp

·        Machine weight: @ 15 kg                                  

·        Require space :1.5 x 1.5x 3.5 feet

·        Easy to operate & low maintenance.

·        Telephonic service free for life time

·        (Monday to Saturday 9 AM to 6 PM, Sunday Weekly off) service discontinue if used other company’s spare in our machine.

Additional Information:

• Delivery Time: 5 days
• Packaging Details: Wooden box packing

Types Of Laser Cutting Cnc Laser Cutting Job WorkType Of Machine         CNC Laser Cutting MachineMaterial SS MSIndustry/Application        Industrial , ConstructionType Of Cutting                Laser CuttingTypes Of CNC Cutting       Laser Cutting